Edit descriptions about installation of components (#3842)

* Replace installation command shortcut for the "just" program with the most conservative raw ansible-playbook command

This commit replaces installation command shortcut ("recipe") for the "just" program with the raw ansible-playbook command, so that the shortcut will be added to it later. The command is so conservative that failure of the command will mean something is clearly broken.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Add comments about using setup-all instead of install-all

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Add description about shortcut command with the "just" program to the ansible-playbook command with "setup-all" and "start" tags

It also explains difference between "just install-all" and "just setup-all" recipes. The explanation is based on docs/playbook-tags.md

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update raw ansible-playbook command to have it do what "just install-all" or "just setup-all" does

Since "just install-all" or "just setup-all" invokes "ensure-matrix-users-created" as well, it needs adding to the raw ansible-playbook command.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Remove "ensure-matrix-users-created" from the raw ansible-playbook command which does not need it

Also: update the "just" recipes accordingly. "just install-all" and "just setup-all" run "ensure-matrix-users-created" tag as well, therefore they need to be replaced with "run-tags" recipes to skip "ensure-matrix-users-created"

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update docs/configuring-playbook-etherpad.md: add ensure-matrix-users-created to the raw ansible-playbook

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Add description about "ensure-matrix-users-created" and create a list with description about shortcut commands with "just"

This commit also fixes list item capitalization and punctuation.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Add notes bullet lists

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update docs/configuring-playbook-matrix-corporal.md and docs/configuring-playbook-email2matrix.md: adopt common instructions

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Replace "run the installation command" with "run the playbook with tags"

Now that shortcut commands for the "just" program are displayed along with the existing "installation command", this commit replaces "run the installation command" with "run the playbook with tags" in order to prevent misunderstanding and confusion.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Add notes about changing passwords of users specified on vars.yml

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update docs/configuring-playbook-synapse-admin.md: add the playbook command and just recipes

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Remove redundant blank lines

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update docs/configuring-playbook-alertmanager-receiver.md: remove the direction to proceed to Usage

Such a kind of direction is not used on other documentation, so it should be fine to just remove it.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update docs/importing-synapse-media-store.md: code block for ansible-playbook

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

---------

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

docs/configuring-playbook-alertmanager-receiver.md

@@ -76,10 +76,20 @@ Steps 3 and 4 need to be done for each new room you'd like the bot to deliver al
 
 ## Installing
 
-Now that you've [prepared the bot account and room](#account-and-room-preparation), [configured the playbook](#adjusting-the-playbook-configuration), and potentially [adjusted your DNS records](#adjusting-dns-records), you can run the [installation](installing.md) command: `just install-all`
+Now that you've [prepared the bot account and room](#account-and-room-preparation), [configured the playbook](#adjusting-the-playbook-configuration), and potentially [adjusted your DNS records](#adjusting-dns-records), you can run the playbook with [playbook tags](playbook-tags.md) as below:
 
-Then, you can proceed to [Usage](#usage).
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
 
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-appservice-double-puppet.md

@@ -16,7 +16,20 @@ matrix_appservice_double_puppet_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-appservice-draupnir-for-all.md

@@ -49,12 +49,20 @@ matrix_appservice_draupnir_for_all_master_control_room_alias: "ALIAS_FROM_STEP_2
 
 ### 4. Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-backup-borg.md

@@ -71,12 +71,17 @@ Check the [backup_borg role](https://github.com/mother-of-all-self-hosting/ansib
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
 ## Manually start a backup
 
 For testing your setup it can be helpful to not wait until 4am. If you want to run the backup immediately, log onto the server and run `systemctl start matrix-backup-borg`. This will not return until the backup is done, so possibly a long time. Consider using [tmux](https://en.wikipedia.org/wiki/Tmux) if your SSH connection is unstable.

docs/configuring-playbook-bot-baibot.md

@@ -376,18 +376,22 @@ matrix_bot_baibot_config_initial_global_config_handler_image_generation: null
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-just run-tags install-all,ensure-matrix-users-created,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
 **Notes**:
 
-- the `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- if you change the bot password (`matrix_bot_baibot_config_user_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_baibot_config_user_password` to let the bot know its new password
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
 
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- If you change the bot password (`matrix_bot_baibot_config_user_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_baibot_config_user_password` to let the bot know its new password.
 
 ## Usage
 

docs/configuring-playbook-bot-buscarron.md

@@ -56,18 +56,22 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
 **Notes**:
 
-- the `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- if you change the bot password (`matrix_bot_buscarron_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_buscarron_password` to let the bot know its new password
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
 
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- If you change the bot password (`matrix_bot_buscarron_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_buscarron_password` to let the bot know its new password.
 
 ## Usage
 

docs/configuring-playbook-bot-chatgpt.md

@@ -56,12 +56,20 @@ You will need to get tokens for ChatGPT.
 
 ## 4. Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=install-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bot-draupnir.md

@@ -115,12 +115,22 @@ That is all you need to do due to that Draupnir can complete migration on its ow
 
 ## 6. Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- If you change the Pantalaimon's password (`matrix_bot_draupnir_pantalaimon_password` in your `vars.yml` file) subsequently, its credentials on the homeserver won't be updated automatically. If you'd like to change the password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_draupnir_pantalaimon_password` to let Pantalaimon know its new password.
 
 ## Usage
 

docs/configuring-playbook-bot-go-neb.md

@@ -219,12 +219,20 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bot-honoroit.md

@@ -48,18 +48,22 @@ If you've decided to use the default hostname, you won't need to do any extra DN
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
 **Notes**:
 
-- the `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- if you change the bot password (`matrix_bot_honoroit_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_honoroit_password` to let the bot know its new password
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
 
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- If you change the bot password (`matrix_bot_honoroit_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_honoroit_password` to let the bot know its new password.
 
 ## Usage
 

docs/configuring-playbook-bot-matrix-registration-bot.md

@@ -32,7 +32,22 @@ The bot account will be created automatically.
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- If you change the bot password (`matrix_bot_matrix_registration_bot_bot_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_matrix_registration_bot_bot_password` to let the bot know its new password.
 
 ## Usage
 

docs/configuring-playbook-bot-matrix-reminder-bot.md

@@ -27,18 +27,22 @@ matrix_bot_matrix_reminder_bot_reminders_timezone: Europe/London
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
 **Notes**:
 
-- the `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- if you change the bot password (`matrix_bot_matrix_reminder_bot_matrix_user_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_matrix_reminder_bot_matrix_user_password` to let the bot know its new password
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
 
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- If you change the bot password (`matrix_bot_matrix_reminder_bot_matrix_user_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_matrix_reminder_bot_matrix_user_password` to let the bot know its new password.
 
 ## Usage
 

docs/configuring-playbook-bot-maubot.md

@@ -49,11 +49,22 @@ If you've decided to use the default hostname, you won't need to do any extra DN
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all`
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
 
 **Notes**:
 
-- if you change the bot password (`matrix_bot_maubot_initial_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_maubot_initial_password` to let the bot know its new password
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- If you change the bot password (`matrix_bot_maubot_initial_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_maubot_initial_password` to let the bot know its new password.
 
 ## Usage
 

docs/configuring-playbook-bot-mjolnir.md

@@ -117,12 +117,22 @@ matrix_synapse_ext_spam_checker_mjolnir_antispam_config_ban_lists: []
 
 ## 7. Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- If you change the Pantalaimon's password (`matrix_bot_mjolnir_pantalaimon_password` in your `vars.yml` file) subsequently, its credentials on the homeserver won't be updated automatically. If you'd like to change the password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_mjolnir_pantalaimon_password` to let Pantalaimon know its new password.
 
 ## Usage
 

docs/configuring-playbook-bridge-appservice-discord.md

@@ -30,12 +30,21 @@ matrix_appservice_discord_bot_token: "YOUR DISCORD APP BOT TOKEN"
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
 ## Self-Service Bridging (Manual)
 
 Self-service bridging allows you to bridge specific and existing Matrix rooms to specific Discord rooms. To enable it, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:

docs/configuring-playbook-bridge-appservice-irc.md

@@ -62,7 +62,20 @@ matrix_appservice_irc_ircService_servers:
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-appservice-kakaotalk.md

@@ -33,12 +33,21 @@ Take a look at:
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
 ## Usage
 
 Start a chat with `@kakaotalkbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).

docs/configuring-playbook-bridge-appservice-slack.md

@@ -65,12 +65,21 @@ Other configuration options are available via the `matrix_appservice_slack_confi
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
 ## Usage
 
 Send `/invite @slackbot:example.com` to invite the bridge bot user into the admin room.

docs/configuring-playbook-bridge-appservice-webhooks.md

@@ -26,12 +26,21 @@ matrix_appservice_webhooks_api_secret: '<your_secret>'
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
 ## Usage
 
 Invite the bridge bot user to your room in either way.

docs/configuring-playbook-bridge-beeper-linkedin.md

@@ -35,7 +35,20 @@ You may wish to look at `roles/custom/matrix-bridge-beeper-linkedin/templates/co
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Set up Double Puppeting by enabling Appservice Double Puppet or Shared Secret Auth
 

docs/configuring-playbook-bridge-go-skype-bridge.md

@@ -14,7 +14,20 @@ matrix_go_skype_bridge_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-heisenbridge.md

@@ -49,7 +49,20 @@ If you've decided to use the default hostname, you won't need to do any extra DN
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-matrix-bridge-sms.md

@@ -33,7 +33,20 @@ matrix_sms_bridge_provider_android_truststore_password: 123
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-discord.md

@@ -42,12 +42,21 @@ Take a look at:
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
 ## Usage
 
 ### Logging in

docs/configuring-playbook-bridge-mautrix-facebook.md

@@ -55,7 +55,20 @@ You may wish to look at `roles/custom/matrix-bridge-mautrix-facebook/templates/c
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-gmessages.md

@@ -20,7 +20,20 @@ matrix_mautrix_gmessages_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-googlechat.md

@@ -20,7 +20,20 @@ matrix_mautrix_googlechat_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-hangouts.md

@@ -22,7 +22,20 @@ matrix_mautrix_hangouts_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-instagram.md

@@ -42,7 +42,20 @@ You may wish to look at `roles/custom/matrix-bridge-mautrix-instagram/templates/
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-meta-instagram.md

@@ -68,7 +68,20 @@ You may wish to look at `roles/custom/matrix-bridge-mautrix-meta-instagram/templ
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-meta-messenger.md

@@ -82,7 +82,20 @@ You may wish to look at `roles/custom/matrix-bridge-mautrix-meta-messenger/templ
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-signal.md

@@ -68,7 +68,20 @@ You may wish to look at `roles/custom/matrix-bridge-mautrix-signal/templates/con
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-slack.md

@@ -44,12 +44,21 @@ Take a look at:
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
 ## Usage
 
 1. Start a chat with `@slackbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).

docs/configuring-playbook-bridge-mautrix-telegram.md

@@ -22,7 +22,20 @@ matrix_mautrix_telegram_api_hash: YOUR_TELEGRAM_API_HASH
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-twitter.md

@@ -22,7 +22,20 @@ matrix_mautrix_twitter_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-whatsapp.md

@@ -36,7 +36,20 @@ If you want to activate the relay bot in a room, send `!wa set-relay`. To deacti
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-wsproxy.md

@@ -41,7 +41,20 @@ By default, you will need to create a CNAME record for `wsproxy`. See [Configuri
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-discord.md

@@ -18,7 +18,20 @@ matrix_mx_puppet_discord_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-groupme.md

@@ -14,7 +14,20 @@ matrix_mx_puppet_groupme_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-instagram.md

@@ -14,7 +14,20 @@ matrix_mx_puppet_instagram_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-slack.md

@@ -23,12 +23,21 @@ matrix_mx_puppet_slack_oauth_client_secret: "<SLACK_APP_CLIENT_SECRET>"
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
 ## Usage
 
 Once the bot is enabled you need to start a chat with `Slack Puppet Bridge` with the handle `@_slackpuppet_bot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).

docs/configuring-playbook-bridge-mx-puppet-steam.md

@@ -14,7 +14,20 @@ matrix_mx_puppet_steam_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-twitter.md

@@ -25,7 +25,20 @@ matrix_mx_puppet_twitter_environment: ''
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-bridge-postmoogle.md

@@ -49,18 +49,22 @@ You will also need to add several DNS records so that Postmoogle can send emails
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
 ```
 
 **Notes**:
 
-- the `ensure-matrix-users-created` playbook tag makes the playbook automatically create a user account of the bridge's bot
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create a user account of the bridge's bot.
 
-- if you change the bridge's bot password (`matrix_postmoogle_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_postmoogle_password` to let the bot know its new password
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
 
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- If you change the bridge's bot password (`matrix_postmoogle_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_postmoogle_password` to let the bot know its new password.
 
 ## Usage
 

docs/configuring-playbook-bridge-wechat.md

@@ -14,7 +14,20 @@ matrix_wechat_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-cactus-comments.md

@@ -63,7 +63,20 @@ If you've decided to use the default hostname, you won't need to do any extra DN
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-client-cinny.md

@@ -42,4 +42,13 @@ If you've adjusted `matrix_client_cinny_hostname`, you will need to adjust your
 
 ## Installing
 
-After configuring the playbook and [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook and [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-client-element-web.md

@@ -71,4 +71,13 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-client-hydrogen.md

@@ -39,4 +39,13 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-client-schildichat-web.md

@@ -69,4 +69,13 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-dendrite.md

@@ -34,4 +34,13 @@ Alternatively, **if there is no pre-defined variable** for a Dendrite setting yo
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-dimension.md

@@ -69,14 +69,20 @@ By default, you will need to create a CNAME record for `dimension`. See [Configu
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-After Dimension has been installed you may need to log out and log back in for it to pick up the new integration manager. Then you can access integrations in Element Web by opening a room, clicking the Room info button (`i`) button in the top right corner of the screen, and then clicking Add widgets, bridges & bots.
+**Notes**:
 
+- The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+  `just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- After Dimension has been installed you may need to log out and log back in for it to pick up the new integration manager. Then you can access integrations in Element Web by opening a room, clicking the Room info button (`i`) button in the top right corner of the screen, and then clicking Add widgets, bridges & bots.
 
 ## Jitsi domain
 

docs/configuring-playbook-dynamic-dns.md

@@ -25,7 +25,16 @@ matrix_dynamic_dns_domain_configurations:
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Additional Reading
 

docs/configuring-playbook-email2matrix.md

@@ -83,6 +83,16 @@ Refer to the official documentation [here](https://github.com/devture/email2matr
 
 ## Installing
 
-To enable Email2Matrix, run the [installation](installing.md) command (`--tags=setup-email2matrix,start`).
+To enable Email2Matrix, run the playbook with [playbook tags](playbook-tags.md) as below:
 
-After installation, you may wish to send a test email to the email address assigned to `mailbox1` (default: `mailbox1@matrix.example.com`) to make sure that Email2Matrix works as expected.
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-email2matrix,start
+```
+
+**Notes**:
+
+- The shortcut commands with `just` program are also available: `just run-tags setup-email2matrix,start` or `just run-tags setup-all,start`
+
+  `just run-tags setup-email2matrix,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- After installation, you may wish to send a test email to the email address assigned to `mailbox1` (default: `mailbox1@matrix.example.com`) to make sure that Email2Matrix works as expected.

docs/configuring-playbook-etherpad.md

@@ -44,7 +44,22 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the Etherpad admin user (`etherpad_admin_username`).
+
+- The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+  `just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- If you change the Etherpad admin user's password (`etherpad_admin_password` in your `vars.yml` file) subsequently, the admin user's credentials on the homeserver won't be updated automatically. If you'd like to change the admin user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `etherpad_admin_password` to let the admin user know its new password.
 
 ## Usage
 

docs/configuring-playbook-jitsi.md

@@ -269,12 +269,17 @@ jitsi_disable_gravatar: false
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
 ## Usage
 
 You can use the self-hosted Jitsi server in multiple ways:

docs/configuring-playbook-ma1sd.md

@@ -131,7 +131,16 @@ matrix_ma1sd_configuration_extension_yaml: |
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Troubleshooting
 

docs/configuring-playbook-matrix-authentication-service.md

@@ -288,9 +288,20 @@ If you've decided to use the default hostname, you won't need to do any extra DN
 
 ## Installing
 
-Now that you've [adjusted the playbook configuration](#adjusting-the-playbook-configuration) and [your DNS records](#adjusting-dns-records), you can run the [installation](installing.md) command: `just install-all`
+Now that you've [adjusted the playbook configuration](#adjusting-the-playbook-configuration) and [your DNS records](#adjusting-dns-records), you can run the playbook with [playbook tags](playbook-tags.md) as below:
 
-If you're in the process of migrating an existing Synapse homeserver to MAS, you should now follow the rest of the steps in the [Migrating an existing Synapse homeserver to Matrix Authentication Service](#migrating-an-existing-synapse-homeserver-to-matrix-authentication-service) guide.
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+**Notes**:
+
+- The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+  `just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- If you're in the process of migrating an existing Synapse homeserver to MAS, you should now follow the rest of the steps in the [Migrating an existing Synapse homeserver to Matrix Authentication Service](#migrating-an-existing-synapse-homeserver-to-matrix-authentication-service) guide.
 
 💡 After installation, you should [verify that Matrix Authentication Service is installed correctly](#verify-that-matrix-authentication-service-is-installed-correctly).
 

docs/configuring-playbook-matrix-corporal.md

@@ -116,8 +116,16 @@ To learn more about what the policy configuration, see the matrix-corporal docum
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command (`--tags=setup-all,start` or `--tags=setup-aux-files,setup-corporal,start`).
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags setup-aux-files,setup-corporal,start` or `just run-tags setup-all,start`
+
+`just run-tags setup-aux-files,setup-corporal,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Matrix Corporal files
 

docs/configuring-playbook-matrix-ldap-registration-proxy.md

@@ -34,4 +34,13 @@ matrix_ldap_registration_proxy_systemd_wanted_services_list_custom:
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-matrix-registration.md

@@ -52,12 +52,16 @@ If you've decided to use the default hostname, you won't need to do any extra DN
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 
@@ -91,3 +95,5 @@ To **list the existing user registration tokens**, use this command:
 ansible-playbook -i inventory/hosts setup.yml \
 --tags=list-matrix-registration-tokens
 ```
+
+The shortcut command with `just` program is also available: `just run-tags list-matrix-registration-tokens`

docs/configuring-playbook-mautrix-bridges.md

@@ -93,7 +93,20 @@ You may wish to look at `roles/custom/matrix-bridge-mautrix-SERVICENAME/template
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
+
+- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Set up Double Puppeting
 

docs/configuring-playbook-ntfy.md

@@ -50,12 +50,16 @@ By default, you will need to create a CNAME record for `ntfy`. See [Configuring
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-pantalaimon.md

@@ -18,4 +18,13 @@ The default configuration should suffice. For advanced configuration, you can ov
 
 ## 2. Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-postgres-backup.md

@@ -29,8 +29,13 @@ Refer to the table below for additional configuration variables and their defaul
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-prometheus-grafana.md

@@ -55,7 +55,16 @@ By default, you will need to create a CNAME record for `stats`. See [Configuring
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## What does it do?
 

docs/configuring-playbook-prometheus-nginxlog.md

@@ -22,7 +22,16 @@ matrix_prometheus_nginxlog_exporter_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Docker Image Compatibility
 

docs/configuring-playbook-prometheus-postgres.md

@@ -12,7 +12,16 @@ prometheus_postgres_exporter_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## What does it do?
 

docs/configuring-playbook-rageshake.md

@@ -51,12 +51,16 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-rest-auth.md

@@ -26,4 +26,13 @@ matrix_synapse_password_config_localdb_enabled: false
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-riot-web.md

@@ -30,4 +30,13 @@ There are a few options for handling this:
 
 ### Re-running the playbook
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-shared-secret-auth.md

@@ -25,4 +25,13 @@ matrix_synapse_password_config_localdb_enabled: false
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-sliding-sync-proxy.md

@@ -39,7 +39,16 @@ If you've decided to use the default hostname, you won't need to do any extra DN
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all`.
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ### External databases
 

docs/configuring-playbook-sygnal.md

@@ -77,12 +77,16 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-synapse-admin.md

@@ -48,7 +48,16 @@ If you've decided to use the default hostname, you won't need to do any extra DN
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-synapse-auto-compressor.md

@@ -18,12 +18,16 @@ matrix_synapse_auto_compressor_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
 ## Usage
 

docs/configuring-playbook-synapse-usage-exporter.md

@@ -50,4 +50,13 @@ If you've decided to use the default hostname, you won't need to do any extra DN
 
 ## Installing
 
-After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the playbook with [playbook tags](playbook-tags.md) as below:
+
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)

docs/configuring-playbook-user-verification-service.md

@@ -90,12 +90,16 @@ This will instruct UVS to verify the OpenID token against any domain given in a
 
 ## Installing
 
-After these variables have been set, run the [installation](installing.md) command to restart UVS:
+After these variables have been set, run the playbook with [playbook tags](playbook-tags.md) as below to restart UVS:
 
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-matrix-user-verification-service,start
 ```
 
+The shortcut commands with `just` program are also available: `just run-tags setup-matrix-user-verification-service,start` or `just run-tags setup-all,start`
+
+`just run-tags setup-matrix-user-verification-service,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
 ## Logging
 
 The configuration variable `UVS_LOG_LEVEL` can be set to:

docs/faq.md

@@ -269,13 +269,20 @@ matrix_server_fqn_element: "element.example.com"
 matrix_server_fqn_etherpad: "etherpad.example.com"
 ```
 
-After configuring the playbook, run the [installation](installing.md) command:
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-**Note**: without setting up [server delegation](howto-server-delegation.md) to `matrix.example.com`, your user identifiers will be like `@user:matrix.example.com`. This is equivalent to having an email address like `bob@mail.company.com`, instead of just `bob@company.com`.
+**Notes**:
+
+- The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+  `just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+
+- Without setting up [server delegation](howto-server-delegation.md) to `matrix.example.com`, your user identifiers will be like `@user:matrix.example.com`. This is equivalent to having an email address like `bob@mail.company.com`, instead of just `bob@company.com`.
 
 ### I don't use the base domain for anything. How am I supposed to set up Server Delegation for Matrix services?
 

docs/importing-synapse-media-store.md

@@ -18,6 +18,8 @@ As an alternative, you can perform a manual restore using the [AWS CLI tool](htt
 
 Run this command (make sure to replace `<server-path-to-media_store>` with a path on your server):
 
-	ansible-playbook -i inventory/hosts setup.yml --extra-vars='server_path_media_store=<server-path-to-media_store>' --tags=import-synapse-media-store
+```sh
+ansible-playbook -i inventory/hosts setup.yml --extra-vars='server_path_media_store=<server-path-to-media_store>' --tags=import-synapse-media-store
+```
 
 **Note**: `<server-path-to-media_store>` must be a file path to a `media_store` directory on the server (not on your local machine!).

docs/maintenance-and-troubleshooting.md

@@ -41,10 +41,13 @@ Re-run the playbook after making these configuration changes.
 ## Remove unused Docker data
 
 You can free some disk space from Docker, see [docker system prune](https://docs.docker.com/engine/reference/commandline/system_prune/) for more information.
+
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=run-docker-prune
 ```
 
+The shortcut command with `just` program is also available: `just run-tags run-docker-prune`
+
 ## Postgres
 
 See the dedicated [PostgreSQL Maintenance](maintenance-postgres.md) documentation page.

docs/maintenance-checking-services.md

@@ -8,6 +8,8 @@ To perform the check, run:
 ansible-playbook -i inventory/hosts setup.yml --tags=self-check
 ```
 
+The shortcut command with `just` program is also available: `just run-tags self-check`
+
 If it's all green, everything is probably running correctly.
 
 Besides this self-check, you can also check whether your server federates with the Matrix network by using the [Federation Tester](https://federationtester.matrix.org/) against your base domain (`example.com`), not the `matrix.example.com` subdomain.

docs/maintenance-migrating.md

@@ -46,6 +46,8 @@ Then, run the command below on your local computer to create the `matrix` user a
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-system-user
 ```
 
+The shortcut command with `just` program is also available: `just run-tags setup-system-user`
+
 **Note**: because the `matrix` user and group are created dynamically on each server, the user/group ID may differ between the old and new server. We suggest that you adjust ownership of `/matrix` files. To adjust the ownership, log in to the new server and run the command:
 
 ```sh
@@ -60,6 +62,8 @@ Finally, run the command below on your local computer to finish the installation
 ansible-playbook -i inventory/hosts setup.yml --tags=install-all,start
 ```
 
+The shortcut command with `just` program is also available: `just run-tags install-all,start`
+
 ### Check if services work
 
 After starting the services, you probably might want to ensure that you've migrated things correctly and that services are running. For instructions, see: [check if services work](maintenance-checking-services.md)

docs/maintenance-synapse.md

@@ -39,6 +39,8 @@ To ask the playbook to run rust-synapse-compress-state, execute:
 ansible-playbook -i inventory/hosts setup.yml --tags=rust-synapse-compress-state
 ```
 
+The shortcut command with `just` program is also available: `just run-tags rust-synapse-compress-state`
+
 By default, all rooms with more than `100000` state group rows will be compressed. If you need to adjust this, pass: `--extra-vars='matrix_synapse_rust_synapse_compress_state_min_state_groups_required=SOME_NUMBER_HERE'` to the command above.
 
 After state compression, you may wish to run a [`FULL` Postgres `VACUUM`](./maintenance-postgres.md#vacuuming-postgresql).

docs/registering-users.md

@@ -112,10 +112,20 @@ For Dendrite:
 matrix_dendrite_client_api_registration_disabled: false
 ```
 
-After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+After configuring the playbook, run it with [playbook tags](playbook-tags.md) as below:
 
-If you're opening up registrations publicly like this, you might also wish to [configure CAPTCHA protection](configuring-captcha.md).
+<!-- NOTE: let this conservative command run (instead of install-all) to make it clear that failure of the command means something is clearly broken. -->
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+**Notes**:
+
+- The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+
+  `just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
 
+- If you're opening up registrations publicly like this, you might also wish to [configure CAPTCHA protection](configuring-captcha.md).
 
 ## Adding/Removing Administrator privileges to an existing user