Merge pull request #3848 from luixxiul/fix

Add details about the difference between install-all and setup-all in speed

docs/configuring-playbook-alertmanager-receiver.md

@@ -88,7 +88,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-appservice-double-puppet.md

@@ -29,7 +29,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-appservice-draupnir-for-all.md

@@ -60,7 +60,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-backup-borg.md

@@ -80,7 +80,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Manually start a backup
 

docs/configuring-playbook-bot-baibot.md

@@ -377,7 +377,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_baibot_config_user_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_baibot_config_user_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-buscarron.md

@@ -69,7 +69,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_buscarron_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_buscarron_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-chatgpt.md

@@ -66,7 +66,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bot-draupnir.md

@@ -122,7 +122,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the Pantalaimon's password (`matrix_bot_draupnir_pantalaimon_password` in your `vars.yml` file) subsequently, its credentials on the homeserver won't be updated automatically. If you'd like to change the password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_draupnir_pantalaimon_password` to let Pantalaimon know its new password.
 

docs/configuring-playbook-bot-go-neb.md

@@ -230,7 +230,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bot-honoroit.md

@@ -60,7 +60,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_honoroit_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_honoroit_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-matrix-registration-bot.md

@@ -44,7 +44,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_matrix_registration_bot_bot_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_matrix_registration_bot_bot_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-matrix-reminder-bot.md

@@ -38,7 +38,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_matrix_reminder_bot_matrix_user_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_matrix_reminder_bot_matrix_user_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-maubot.md

@@ -62,7 +62,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_maubot_initial_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_maubot_initial_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-mjolnir.md

@@ -124,7 +124,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the Pantalaimon's password (`matrix_bot_mjolnir_pantalaimon_password` in your `vars.yml` file) subsequently, its credentials on the homeserver won't be updated automatically. If you'd like to change the password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_mjolnir_pantalaimon_password` to let Pantalaimon know its new password.
 

docs/configuring-playbook-bridge-appservice-discord.md

@@ -43,7 +43,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Self-Service Bridging (Manual)
 

docs/configuring-playbook-bridge-appservice-irc.md

@@ -75,7 +75,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-appservice-kakaotalk.md

@@ -46,7 +46,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-appservice-slack.md

@@ -78,7 +78,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-appservice-webhooks.md

@@ -39,7 +39,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-beeper-linkedin.md

@@ -50,7 +50,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Set up Double Puppeting by enabling Appservice Double Puppet or Shared Secret Auth
 

docs/configuring-playbook-bridge-go-skype-bridge.md

@@ -27,7 +27,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-heisenbridge.md

@@ -62,7 +62,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-matrix-bridge-sms.md

@@ -46,7 +46,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-discord.md

@@ -54,7 +54,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-facebook.md

@@ -70,7 +70,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-gmessages.md

@@ -33,7 +33,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-googlechat.md

@@ -33,7 +33,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-hangouts.md

@@ -35,7 +35,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-instagram.md

@@ -57,7 +57,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-meta-instagram.md

@@ -82,7 +82,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-meta-messenger.md

@@ -95,7 +95,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-signal.md

@@ -84,7 +84,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-slack.md

@@ -56,7 +56,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-telegram.md

@@ -35,7 +35,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-twitter.md

@@ -35,7 +35,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-whatsapp.md

@@ -49,7 +49,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-wsproxy.md

@@ -54,7 +54,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-discord.md

@@ -31,7 +31,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-groupme.md

@@ -27,7 +27,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-instagram.md

@@ -27,7 +27,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-slack.md

@@ -36,7 +36,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-steam.md

@@ -27,7 +27,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-twitter.md

@@ -38,7 +38,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-postmoogle.md

@@ -61,7 +61,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bridge's bot password (`matrix_postmoogle_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_postmoogle_password` to let the bot know its new password.
 

docs/configuring-playbook-bridge-wechat.md

@@ -27,7 +27,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-cactus-comments.md

@@ -76,7 +76,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-client-cinny.md

@@ -50,4 +50,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-client-element-web.md

@@ -77,4 +77,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-client-hydrogen.md

@@ -48,4 +48,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-client-schildichat-web.md

@@ -76,4 +76,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-dendrite.md

@@ -41,4 +41,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-dimension.md

@@ -80,7 +80,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 - After Dimension has been installed you may need to log out and log back in for it to pick up the new integration manager. Then you can access integrations in Element Web by opening a room, clicking the Room info button (`i`) button in the top right corner of the screen, and then clicking Add widgets, bridges & bots.
 

docs/configuring-playbook-dynamic-dns.md

@@ -34,7 +34,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Additional Reading
 

docs/configuring-playbook-etherpad.md

@@ -56,7 +56,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the Etherpad admin user's password (`etherpad_admin_password` in your `vars.yml` file) subsequently, the admin user's credentials on the homeserver won't be updated automatically. If you'd like to change the admin user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `etherpad_admin_password` to let the admin user know its new password.
 

docs/configuring-playbook-jitsi.md

@@ -276,7 +276,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-ma1sd.md

@@ -138,7 +138,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Troubleshooting
 

docs/configuring-playbook-matrix-authentication-service.md

@@ -289,7 +289,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 - If you're in the process of migrating an existing Synapse homeserver to MAS, you should now follow the rest of the steps in the [Migrating an existing Synapse homeserver to Matrix Authentication Service](#migrating-an-existing-synapse-homeserver-to-matrix-authentication-service) guide.
 

docs/configuring-playbook-matrix-ldap-registration-proxy.md

@@ -43,4 +43,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-matrix-registration.md

@@ -60,7 +60,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-mautrix-bridges.md

@@ -106,7 +106,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Set up Double Puppeting
 

docs/configuring-playbook-ntfy.md

@@ -58,7 +58,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-pantalaimon.md

@@ -27,4 +27,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-postgres-backup.md

@@ -35,4 +35,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-prometheus-grafana.md

@@ -64,7 +64,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## What does it do?
 

docs/configuring-playbook-prometheus-nginxlog.md

@@ -31,7 +31,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Docker Image Compatibility
 

docs/configuring-playbook-prometheus-postgres.md

@@ -21,7 +21,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## What does it do?
 

docs/configuring-playbook-rageshake.md

@@ -60,7 +60,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-rest-auth.md

@@ -35,4 +35,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-riot-web.md

@@ -36,4 +36,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-shared-secret-auth.md

@@ -34,4 +34,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-sliding-sync-proxy.md

@@ -47,7 +47,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ### External databases
 

docs/configuring-playbook-sygnal.md

@@ -86,7 +86,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-synapse-admin.md

@@ -56,7 +56,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-synapse-auto-compressor.md

@@ -25,7 +25,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-synapse-usage-exporter.md

@@ -59,4 +59,4 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+`just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/faq.md

@@ -279,7 +279,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 - Without setting up [server delegation](howto-server-delegation.md) to `matrix.example.com`, your user identifiers will be like `@user:matrix.example.com`. This is equivalent to having an email address like `bob@mail.company.com`, instead of just `bob@company.com`.
 

docs/installing.md

@@ -154,6 +154,6 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 After you get familiar with reconfiguring and re-running the playbook to maintain the server, upgrade its services, etc., you probably would like to make use of `just` shortcut commands for faster input.
 
-For example, `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+For example, `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 You can learn about the shortcut commands on this page: [Running `just` commands](just.md)

docs/maintenance-upgrading-services.md

@@ -47,9 +47,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account, if any.
 
-- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
+- Our estimation is that running `--tags=install-all,start` is approximately from **2 to 5 times faster** than running `setup-all,ensure-matrix-users-created,start`. See [this entry](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) on `CHANGELOG.md` for more information.
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 - See [this page on the playbook tags](playbook-tags.md) for more information about those tags.
 

docs/registering-users.md

@@ -119,7 +119,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 - The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+  `just install-all` is useful for maintaining your setup quickly ([2x-5x faster](../CHANGELOG.md#2x-5x-performance-improvements-in-playbook-runtime) than `just setup-all`) when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 - If you're opening up registrations publicly like this, you might also wish to [configure CAPTCHA protection](configuring-captcha.md).