Update lines for installing instruction: add anchor link to "adjusting DNS records" header

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
vor 1 Jahr · e8c61b0a3c
--- a/docs/configuring-playbook-alertmanager-receiver.md
+++ b/docs/configuring-playbook-alertmanager-receiver.md
@@ -76,7 +76,7 @@ Steps 3 and 4 need to be done for each new room you'd like the bot to deliver al

 ## Installing

 Now that you've [prepared the bot account and room](#account-and-room-preparation) and have [configured the playbook](#configuration), you can run the [installation](installing.md) command: `just install-all`
 Now that you've [prepared the bot account and room](#account-and-room-preparation), [configured the playbook](#configuration), and potentially [adjusted your DNS records](#adjusting-dns-records), you can run the [installation](installing.md) command: `just install-all`

 Then, you can proceed to [Usage](#usage).

--- a/docs/configuring-playbook-bot-buscarron.md
+++ b/docs/configuring-playbook-bot-buscarron.md
@@ -56,7 +56,7 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command:
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:

 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
--- a/docs/configuring-playbook-bot-go-neb.md
+++ b/docs/configuring-playbook-bot-go-neb.md
@@ -217,7 +217,7 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra

 ## Installing

 After potentially [adjusting DNS records](#adjusting-dns-records) and configuring the playbook, run the [installation](installing.md) command again:
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:

 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
--- a/docs/configuring-playbook-bot-honoroit.md
+++ b/docs/configuring-playbook-bot-honoroit.md
@@ -48,7 +48,7 @@ If you've decided to use the default hostname, you won't need to do any extra DN

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command:
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:

 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
--- a/docs/configuring-playbook-bot-maubot.md
+++ b/docs/configuring-playbook-bot-maubot.md
@@ -51,7 +51,7 @@ If you've decided to use the default hostname, you won't need to do any extra DN

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all`
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all`

 **Notes**:

--- a/docs/configuring-playbook-bridge-heisenbridge.md
+++ b/docs/configuring-playbook-bridge-heisenbridge.md
@@ -49,7 +49,7 @@ If you've decided to use the default hostname, you won't need to do any extra DN

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`

 ## Usage

--- a/docs/configuring-playbook-bridge-mautrix-wsproxy.md
+++ b/docs/configuring-playbook-bridge-mautrix-wsproxy.md
@@ -41,7 +41,7 @@ By default, you will need to create a CNAME record for `wsproxy`. See [Configuri

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`

 ## Usage

--- a/docs/configuring-playbook-cactus-comments.md
+++ b/docs/configuring-playbook-cactus-comments.md
@@ -63,7 +63,7 @@ If you've decided to use the default hostname, you won't need to do any extra DN

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`

 ## Usage

--- a/docs/configuring-playbook-client-cinny.md
+++ b/docs/configuring-playbook-client-cinny.md
@@ -39,4 +39,4 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
--- a/docs/configuring-playbook-client-element.md
+++ b/docs/configuring-playbook-client-element.md
@@ -66,4 +66,4 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
--- a/docs/configuring-playbook-client-hydrogen.md
+++ b/docs/configuring-playbook-client-hydrogen.md
@@ -39,4 +39,4 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
--- a/docs/configuring-playbook-client-schildichat.md
+++ b/docs/configuring-playbook-client-schildichat.md
@@ -65,4 +65,4 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`
--- a/docs/configuring-playbook-dimension.md
+++ b/docs/configuring-playbook-dimension.md
@@ -73,7 +73,7 @@ By default, you will need to create a CNAME record for `dimension`. See [Configu

 ## Installing

 After these variables have been set and you have potentially [adjusted your DNS records](#adjusting-dns-records), please run the following command to re-run setup and to restart Dimension:
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:

 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
--- a/docs/configuring-playbook-etherpad.md
+++ b/docs/configuring-playbook-etherpad.md
@@ -44,7 +44,7 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`

 ## Usage

--- a/docs/configuring-playbook-jitsi.md
+++ b/docs/configuring-playbook-jitsi.md
@@ -284,7 +284,7 @@ Besides metadata, this includes the Matrix user_id and possibly the room identif

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command:
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:

 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
--- a/docs/configuring-playbook-matrix-authentication-service.md
+++ b/docs/configuring-playbook-matrix-authentication-service.md
@@ -269,7 +269,7 @@ If you've decided to use the default hostname, you won't need to do any extra DN

 ## Installing

 Now that you've [adjusted the playbook configuration](#adjusting-the-playbook-configuration), you can run the [installation](installing.md) command: `just install-all`
 Now that you've [adjusted the playbook configuration](#adjusting-the-playbook-configuration) and [your DNS records](#adjusting-dns-records), you can run the [installation](installing.md) command: `just install-all`

 If you're in the process of migrating an existing Synapse homeserver to MAS, you should now follow the rest of the steps in the [Migrating an existing homeserver to Matrix Authentication Service](#migrating-an-existing-homeserver-to-matrix-authentication-service) guide.

--- a/docs/configuring-playbook-matrix-registration.md
+++ b/docs/configuring-playbook-matrix-registration.md
@@ -52,7 +52,7 @@ If you've decided to use the default hostname, you won't need to do any extra DN

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command:
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:

 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
--- a/docs/configuring-playbook-ntfy.md
+++ b/docs/configuring-playbook-ntfy.md
@@ -50,7 +50,7 @@ By default, you will need to create a CNAME record for `ntfy`. See [Configuring

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command:
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:

 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
--- a/docs/configuring-playbook-prometheus-grafana.md
+++ b/docs/configuring-playbook-prometheus-grafana.md
@@ -55,7 +55,7 @@ By default, you will need to create a CNAME record for `stats`. See [Configuring

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`

 ## What does it do?

--- a/docs/configuring-playbook-rageshake.md
+++ b/docs/configuring-playbook-rageshake.md
@@ -51,7 +51,7 @@ If you've decided to reuse the `matrix.` domain, you won't need to do any extra

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command:
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:

 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
--- a/docs/configuring-playbook-sliding-sync-proxy.md
+++ b/docs/configuring-playbook-sliding-sync-proxy.md
@@ -44,7 +44,7 @@ If you've decided to use the default hostname, you won't need to do any extra DN

 ## Installing

 After potentially [adjusting DNS records](#adjusting-dns-records) and configuring the playbook, run the [installation](installing.md) command again: `just install-all`.
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all`.

 ### External databases

--- a/docs/configuring-playbook-synapse-admin.md
+++ b/docs/configuring-playbook-synapse-admin.md
@@ -48,8 +48,7 @@ If you've decided to use the default hostname, you won't need to do any extra DN

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all`

 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command:

 ## Usage

--- a/docs/configuring-playbook-synapse-usage-exporter.md
+++ b/docs/configuring-playbook-synapse-usage-exporter.md
@@ -50,4 +50,4 @@ If you've decided to use the default hostname, you won't need to do any extra DN

 ## Installing

 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 After configuring the playbook and potentially [adjusting your DNS records](#adjusting-dns-records), run the [installation](installing.md) command: `just install-all` or `just setup-all`