* Add a global config option for Docker network MTU

* Upgrade systemd_docker_base (v1.2.0-0 -> v1.3.0-0)

The new version includes `devture_systemd_docker_base_container_networks_driver_options`
due to 3cc7d12396

Related to https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/3502

* Switch from passing matrix_playbook_docker_network_mtu to respecting devture_systemd_docker_base_container_networks_driver_options

Related to:
- 3cc7d12396
- https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/3502

* Update all roles to versions that respect `devture_systemd_docker_base_container_networks_driver_options`

---------

Co-authored-by: Slavi Pantaleev <slavi@devture.com>

commit cf8637efac
Author: Slavi Pantaleev <slavi@devture.com>
Date:   Sun Mar 24 19:14:57 2024 +0200

    Make devture_systemd_docker_base_ipv6_enabled automatically reconfigure geerlingguy/ansible-role-docker

    Related to https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/3218

commit dc7af3bc7d
Author: Slavi Pantaleev <slavi@devture.com>
Date:   Sun Mar 24 19:10:31 2024 +0200

    Replace matrix_ipv6_enabled with devture_systemd_docker_base_ipv6_enabled

    Related to https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/3218

commit 07e900d6a2
Author: Slavi Pantaleev <slavi@devture.com>
Date:   Sun Mar 24 19:01:51 2024 +0200

    Improve matrix_ipv6_enabled comments

commit 3f03ca7f69
Author: Tilo Spannagel <development@tilosp.de>
Date:   Sat Mar 9 19:27:50 2024 +0000

    Add setting to enable ipv6

We expect `--tags=start` to handle systemd reloading, so we don't need
to do it manually each time we install/uninstall a .service file.

This was useful when the order of these roles in relation to Synapse
mattered (when we were injecting stuff into Synapse variables during
runtime). This is no longer the case since 0ea7cb5d1812a88, so all of
this can be removed.

This paves the way for installing other roles into `roles/galaxy` using `ansible-galaxy`,
similar to how it's done in:

- https://github.com/spantaleev/gitea-docker-ansible-deploy
- https://github.com/spantaleev/nextcloud-docker-ansible-deploy

In the near future, we'll be removing a lot of the shared role code from here
and using upstream roles for it. Some of the core `matrix-*` roles have
already been extracted out into other reusable roles:

- https://github.com/devture/com.devture.ansible.role.postgres
- https://github.com/devture/com.devture.ansible.role.systemd_docker_base
- https://github.com/devture/com.devture.ansible.role.timesync
- https://github.com/devture/com.devture.ansible.role.vars_preserver
- https://github.com/devture/com.devture.ansible.role.playbook_runtime_messages
- https://github.com/devture/com.devture.ansible.role.playbook_help

We just need to migrate to those.

Signed-off-by: Sebastian Gumprich <github@gumpri.ch>

Reference: https://ansible-lint.readthedocs.io/en/latest/default_rules/#git-latest

Our variable naming is not necessarily consistent across roles.
I've tried to follow the naming conventions of each individual role.
All new variables are suffixed with `_version`, but the prefix may be
somewhat different.

Related to https://github.com/spantaleev/matrix-docker-ansible-deploy/pull/1939

Fixes https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/1749

The `to_nice_yaml` helper will by default wrap any string YAML values on
the first space after column 80. This can in worst case yield invalid
YAML syntax. More details in Ansible's documentation here:

https://docs.ansible.com/ansible/latest/user_guide/playbooks_filters.html#formatting-data-yaml-and-json

In short, you need to explicitly provide a custom width argument of a
high number of some kind to avoid the line wrapping.

Remove references to sqlite since we should just use postgres from the
outset.

find roles/matrix-bridge-mautrix-twitter -type f -exec sed -i \
  -e 's/facebook/twitter/g' \
  -e 's/Facebook/Twitter/g' \
  -e 's/FB/Twitter/g' \
  -e 's/fb/twitter/g' {} +

Until now, we were leaving services "enabled"
(symlinks in /etc/systemd/system/multi-user.target.wants/).

We clean these up now. Broken symlinks may still exist in older
installations that enabled/disabled services. We're not taking care
to fix these up. It's just a cosmetic defect anyway.

Fixes https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/1070

Looks like there are some that I missed in 087dbe4ddc

Fixes https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/716

This patch makes us use more fully-qualified container image names
(either prefixed with docker.io/ or with localhost/).

The latter happens when self-building is enabled.

We've recently had issues where if an image was removed manually
and the service was restarted (making `docker run` fetch it from Docker Hub, etc.),
we'd end up with a pulled image, even though we're aiming for a self-built one.
Re-running the playbook would then not do a rebuild, because:
- the image with that name already exists (even though it's something
else)
- we sometimes had conditional logic where we'd build only if the git
repo changed

By explicitly changing the name of the images (prefixing with localhost/),
we avoid such confusion and the possibility that we'd automatically pul something
which is not what we expect.

Also, I've removed that condition where building would happen on git
changes only. We now always build (unless an image with that name
already exists). We just force-build when the git repo changes.

No migration steps should be required.

Fixes #403 (Github Issue).

Until now, if `--tags=setup-synapse` was used, bridge tasks would not
run and bridges would fail to register with the `matrix-synapse` role.
This means that Synapse's configuration would be generated with an empty
list of appservices (`app_service_config_files: []`).

.. and then bridges would fail, because Synapse would not be aware of
there being any bridges.

From now on, bridges always run their init tasks and always register
with Synapse.

For the Telegram bridge, the same applies to registering with
matrix-nginx-proxy. Previously, running `--tags=setup-nginx-proxy` would
get rid of the Telegram endpoint configuration for the same reason.
Not anymore.

We do use some `:latest` images by default for the following services:
- matrix-dimension
- Goofys (in the matrix-synapse role)
- matrix-bridge-appservice-irc
- matrix-bridge-appservice-discord
- matrix-bridge-mautrix-facebook
- matrix-bridge-mautrix-whatsapp

It's terribly unfortunate that those software projects don't release
anything other than `:latest`, but that's how it is for now.

Updating that software requires that users manually do `docker pull`
on the server. The playbook didn't force-repull images that it already
had.

With this patch, it starts doing so. Any image tagged `:latest` will be
force re-pulled by the playbook every time it's executed.

It should be noted that even though we ask the `docker_image` module to
force-pull, it only reports "changed" when it actually pulls something
new. This is nice, because it lets people know exactly when something
gets updated, as opposed to giving the indication that it's always
updating the images (even though it isn't).

I'm not sure what I had in mind when I added this earlier,
but I think we'd better go without it.

Using a separate directory allows easier backups
(only need to back up the Ansible playbook configuration and the
bridge's `./data` directory).

The playbook takes care of migrating an existing database file
from the base directory into the `./data` directory.

In the future, we can also mount the configuration read-only,
to ensure the bridge won't touch it.
For now, mautrix-facebook is keen on rebuilding the `config.yaml`
file on startup though, so this will have to wait.

Related to #193, but for the Facebook bridge.
(other bridges can be changed to do the same later).

This patch makes the bridge configuration entirely managed by the
Ansible playbook. The bridge's `config.yaml` and `registration.yaml`
configuration files are regenerated every time the playbook runs.

This allows us to apply updates to those files and to avoid
people having to manage the configuration files manually on the server.

-------------------------------------------------------------

A deficiency of the current approach to dumping YAML configuration in
`config.yaml` is that we strip all comments from it.
Later on, when the bridge actually starts, it will load and redump
(this time with comments), which will make the `config.yaml` file
change.

Subsequent playbook runs will report "changed" for the
"Ensure mautrix-facebook config.yaml installed" task, which is a little
strange.

We might wish to improve this in the future, if possible.

Still, it's better to have a (usually) somewhat meaningless "changed"
task than to what we had -- never rebuilding the configuration.

This doesn't replace all usage of `-v`, but it's a start.

People sometimes troubleshoot by deleting files (especially bridge
config files). Restarting Synapse with a missing registration.yaml file
for a given bridge, causes the `-v
/something/registration.yaml:/something/registration.yaml:ro` option
to force-create `/something/registration.yaml` as a directory.

When a path that's provided to the `-v` option is missing, Docker
auto-creates that path as a directory.
This causes more breakage and confusion later on.

We'd rather fail, instead of magically creating directories.
Using `--mount`, instead of `-v` is the solution to this.

From Docker's documentation:

> When you use --mount with type=bind, the host-path must refer to an existing path on the host.
> The path will not be created for you and the service will fail with an error if the path does not exist.