Also:
- docs/configuring-playbook-bot-draupnir.md: adjust the sections
- docs/configuring-playbook-bot-mjolnir.md: add the common instruction to the document for Mjolnir
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Removing the rate limits is the last task before setting the component for use after the bot user is supposed to have been created successfully. Since running the playbook with the "start" tag would start Draupnir or Mjolnir as well, it should be done after running the playbook for installation initially.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
It is necessary to run the playbook to apply the configuration so that the curl command, which is described below, can be successfully executed.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
- Move the note about ensure-matrix-users-created from below
- Update the installation command: the "ensure-matrix-users-created" tag is no longer necessary as it is instructed to run above
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Because enabling the native E2EE support requires the clean access token obtained with curl, which is supposed to be specified to "matrix_bot_draupnir_access_token", setting "matrix_bot_draupnir_enable_experimental_rust_crypto" to true means that "matrix_bot_draupnir_access_token" is also specified.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
The setting is required, and it is not friendly to split the required settings with optional ones.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
- docs/configuring-playbook-bot-mjolnir.md: move the warning above where the access token is mentioned at first
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Now that the bot user for Draupnir is created automatically and you no longer need to register it manually since its 2.0.0 version, it does not seem to be sensible to synchronize descriptions about inviting bots between documents for Draupnir and Mjolnir and instruct to invite the bot which does not exist just yet. Inviting the bot user after actually creating it will also spare the possible error message about the nonexistent user.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Draupnir 2.0.0
The config getting changes all over the place is because of 2.0 having removed a lot of config options due to the code being removed.
* Update Draupnir Documentation to reflect state as of 2.0.0
* Apply Review Feedback
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Change Room IDs found in code review to not conform to playbook standard.
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Further Integrate Code Review Feedback
* Apply remaining suggestions from code review.
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Apply Configuration Review Feedback
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Add Self Registration and Native Login to Draupnir
* Rework Draupnir Documentation to Remove Pantalaimon
* Set bot.draupnir as default username for the bot in config
* Draupnir 2.0.1
* Integrate Review Feedback on Structure of Docs
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Further Restructure Docs and tweak variables in response.
* Only auto-create draupnir user if a password has been set
The Draupnir role supports configuring it with either an access token or with a password.
When a password is not assigned (which means the access token mode is used), the user is to be created manually.
* Add ensure-matrix-users-created tag
Now that the Draupnir user may be auto-created in certain configurations (if a password is assigned), it's useful to have the tag there.
---------
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Rename sygnal.yaml.j2 to config.yaml.j2
There does not seem to exist other yaml.j2 files, which would be named after the servive.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-sygnal.md: add the section "Extending the configuration"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: add the common section "Extending the configuration"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: add the option to configure the default pad text
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: remove the detail about setting the unmaintained Dimension default to the Etherpad instance
We have recommended users to avoid installing Dimension since it was deprecated, so it is no longer sensible to discuss how it could be integrated with Etherpad.
This commit also removes the known issue section as it describes the issue which can be experienced on Dimension only.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: minor changes
- Update the internal anchor link (follow-up to 04b32af0c1)
- minor edits
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Apply the feedback
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-turn.md: add a section for description about installing
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-turn.md and a related file
- Edit the introducion based on docs/configuring-playbook-client-element-web.md
- Adopt the commont format by creating the section "Adjusting the playbook configuration"
- Add the section "Extending the configuration"
- Move the section "Disabling Coturn" to the bottom
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Fix capitalization: Coturn → coturn
See: https://github.com/coturn/coturn. Note that "coturn" is not capitalized even on the start of a sentence, except some rare cases like on the releases page: https://github.com/coturn/coturn/releases
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/updating-users-passwords.md: use the common placeholder for an access token
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: edit the introduction
Based on docs/configuring-playbook-jitsi.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-backup-borg.md: add the section "Extending the configuration"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-backup-borg.md
- Move the instruction about setting up the server to the section "Prerequisites"
- Replace instructions with a listing with a common format
- Adopt the common descripton for setting a strong password
- Create sections for optional configurations
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-backup-borg.md: add descriptions about other useful options
This commit adds descriptions about options for setting the archive name and the retention policy.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-backup-borg.md: remove the instruction about creating a backup without encryption
It is generally not recommended to store unencrypted backups on computers which you do not own, so this commit removes it from the guide.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Now that the large table for DNS settings is gone, it is sensible to move the section about DNS setting for server delegation down, below the section for DNS configuration for default services.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs for DNS settings of the services which need its CNAME record by default
- Buscarron
- Go-NEB; fix a line on the instruction as well
- wsproxy
- Cinny
- Element Web
- Hydrogen
- SchildiChat Web
- Dimension
- Etherpad
- Jitsi
- ntfy
- Grafana
- rageshake
- Sygnal
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs for DNS settings of the services which do not need its CNAME record by default
- matrix-alertmanager-receiver
- Honoroit
- maubot
- Heisenbridge
- Cactus Comments
- Matrix Authentication Service
- matrix-registration
- Sliding Sync proxy
- Synapse Admin
- synapse-usage-exporter
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs for DNS settings: ma1sd
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs for DNS settings: Email2Matrix
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs for DNS settings: Postmoogle
Remove the table from configuring-dns.md altogether
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs for Cinny and Dimension: adopt the common note
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-dns.md: add "Note" to the line on using Cloudflare DNS
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: tidy up the introduction
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: minor changes
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: remove the obsolete notice about Element mobile apps not supporting self-hosted Jitsi server
The notice has been obsolete since 993fd04353 (for Android) and 0142bb04e4 (for iOS)
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: create a list for descriptions about each tweak for tuning Jitsi
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: tidy up the section for setting up additional JVBs
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: move down the section for tuning Jitsi
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: include sections to "Adjusting the playbook configuration"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: move the section for confugiring additional JVBs into the 'Usage' section
Since the additional JVBs are supposed to be configured after installing Jitsi with a JVB and it is confusing to place the instruction for configuring them (ansible-playbook -i inventory/hosts --limit jitsi_jvb_servers jitsi_jvb.yml --tags=common,setup-additional-jitsi-jvb,start) above the command for installation (ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start), this commit moves the section for configuring the additional JVBs into the "Usage" section.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: tidy up the section for authentication
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: move the note to the section "Troubleshooting"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: tidy up the section for setting up a Gravatar service
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: replace the description about running behind NAT or on a LAN environment with the official one
Our original description was unorganized and difficult to understand, so this commit simply replaces it with the official documentation provided by Jitsi, which is clear and straightforward.
See: 630a6817c2/docs/devops-guide/docker.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: tidy up the section for rebuilding the Jitsi installation
It feels like the section is no longer relevant pretty much, as one of the main reasons why rebuilding the installation has seemed to be a difficult but reasonable option would be the quality of our documentation; it has been unorganized and it has been difficult to see what needs to be done in which order. Now that the issue was mostly addressed, perhaps it might make sense to remove the section altogether or move it to FAQ.md and rewrite it for components which are as complex as Jitsi.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: switch the order of instructions about adjusting DNS records and adjusting the URL
Since adjusting DNS records does not belong to adjusting the playbook configuration, the section was moved out of it.
This is a first trial of placing the instruction about adjusting DNS records above the section for adjusting the URL. Once it is confirmed that this change makes sense, the other instances will be addressed with another commit.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: switch lines for fine tuning Jitsi to remove a blank line
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: add a practical example of configurations
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: remove a duplicated comment inside jitsi_web_custom_config_extension
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: edit the introduction
Based on docs/configuring-playbook-etherpad.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: remove a mention about the unmaintained Dimension integration manager
As Dimension has been officially declared to be unmaintained and we have stopped recommending to install it since 4574ebbd31888c26dc72a9449e8b6c7427e8bc3f, it is a reasonable choice to remove the explanation which suggests to add a Jitsi widget with the component.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: replace the obsolete details about LastN
The document has been removed with 9a955ef1b4.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: minor changes
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: move the description about meetings with authentication enabled out of the section for the default authentication method
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: edit descriptions about authentication methods
Based on f6fdb30997/defaults/main.yml
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-user-verification-service.md: add an anchor link to the Jitsi docs on `matrix` authentication
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Suguru Hirahara
Suguru Hirahara
Catalan Lover