* Update docs/configuring-playbook-turn.md: add a section for description about installing
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-turn.md and a related file
- Edit the introducion based on docs/configuring-playbook-client-element-web.md
- Adopt the commont format by creating the section "Adjusting the playbook configuration"
- Add the section "Extending the configuration"
- Move the section "Disabling Coturn" to the bottom
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Fix capitalization: Coturn → coturn
See: https://github.com/coturn/coturn. Note that "coturn" is not capitalized even on the start of a sentence, except some rare cases like on the releases page: https://github.com/coturn/coturn/releases
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
This helps large deployments which need to open up thousands of ports
(matrix_coturn_turn_udp_min_port, matrix_coturn_turn_udp_min_port)
On a test VM, opening 1k ports takes 17 seconds for Docker to "publish"
all of these ports (setting up forwarding rules with the firewall, etc),
so service startup and shutdown take a long amount of time.
If host-networking is used, there's no need to open any ports at all
and startup/shutdown can be quick.
People often report and ask about these "failures".
More-so previously, when the `docker kill/rm` output was collected,
but it still happens now when people do `systemctl status
matrix-something` and notice that it says "FAILURE".
Suppressing to avoid further time being wasted on saying "this is
expected".
Reverts b1b4ba501fdfaa, 90c9801c560b6, a3c84f78ca9c65a, ..
I haven't really traced it (yet), but on some servers, I'm observing
`ansible-playbook ... --tags=start` completing very slowly, waiting
to stop services. I can't reproduce this on all Matrix servers I manage.
I suspect that either the systemd version is to blame or that some
specific service is not responding well to some `docker kill/rm` command.
`ExecStop` seems to work great in all cases and it's what we've been
using for a very long time, so I'm reverting to that.
These are just defensive cleanup tasks that we run.
In the good case, there's nothing to kill or remove, so they trigger an
error like this:
> Error response from daemon: Cannot kill container: something: No such container: something
and:
> Error: No such container: something
People often ask us if this is a problem, so instead of always having to
answer with "no, this is to be expected", we'd rather eliminate it now
and make logs cleaner.
In the event that:
- a container is really stuck and needs cleanup using kill/rm
- and cleanup fails, and we fail to report it because of error
suppression (`2>/dev/null`)
.. we'd still get an error when launching ("container name already in use .."),
so it shouldn't be too hard to investigate.
The Docker 19.04 -> 20.10 upgrade contains the following change
in `/usr/lib/systemd/system/docker.service`:
```
-BindsTo=containerd.service
-After=network-online.target firewalld.service containerd.service
+After=network-online.target firewalld.service containerd.service multi-user.target
-Requires=docker.socket
+Requires=docker.socket containerd.service
Wants=network-online.target
```
The `multi-user.target` requirement in `After` seems to be in conflict
with our `WantedBy=multi-user.target` and `After=docker.service` /
`Requires=docker.service` definitions, causing the following error on
startup for all of our systemd services:
> Job matrix-synapse.service/start deleted to break ordering cycle starting with multi-user.target/start
A workaround which appears to work is to add `DefaultDependencies=no`
to all of our services.
Depending on the distro, common commands like sleep and chown may either
be located in /bin or /usr/bin.
Systemd added path lookup to ExecStart in v239, allowing only the
command name to be put in unit files and not the full path as
historically required. At least Ubuntu 18.04 LTS is however still on
v237 so we should maintain portability for a while longer.
Reasoning is the same as for matrix-org/synapse#5023.
For us, the journal used to contain `docker` for all services, which
is not very helpful when looking at them all together (`journalctl -f`).
Most (all?) of our Matrix services are running in the `matrix` network,
so they were safe -- not accessible from Coturn to begin with.
Isolating Coturn into its own network is a security improvement
for people who were starting other services in the default
Docker network. Those services were potentially reachable over the
private Docker network from Coturn.
Discussed in #120 (Github Pull Request)
We run containers as a non-root user (no effective capabilities).
Still, if a setuid binary is available in a container image, it could
potentially be used to give the user the default capabilities that the
container was started with. For Docker, the default set currently is:
- "CAP_CHOWN"
- "CAP_DAC_OVERRIDE"
- "CAP_FSETID"
- "CAP_FOWNER"
- "CAP_MKNOD"
- "CAP_NET_RAW"
- "CAP_SETGID"
- "CAP_SETUID"
- "CAP_SETFCAP"
- "CAP_SETPCAP"
- "CAP_NET_BIND_SERVICE"
- "CAP_SYS_CHROOT"
- "CAP_KILL"
- "CAP_AUDIT_WRITE"
We'd rather prevent such a potential escalation by dropping ALL
capabilities.
The problem is nicely explained here: https://github.com/projectatomic/atomic-site/issues/203
With this change, the following roles are now only dependent
on the minimal `matrix-base` role:
- `matrix-corporal`
- `matrix-coturn`
- `matrix-mailer`
- `matrix-mxisd`
- `matrix-postgres`
- `matrix-riot-web`
- `matrix-synapse`
The `matrix-nginx-proxy` role still does too much and remains
dependent on the others.
Wiring up the various (now-independent) roles happens
via a glue variables file (`group_vars/matrix-servers`).
It's triggered for all hosts in the `matrix-servers` group.
According to Ansible's rules of priority, we have the following
chain of inclusion/overriding now:
- role defaults (mostly empty or good for independent usage)
- playbook glue variables (`group_vars/matrix-servers`)
- inventory host variables (`inventory/host_vars/matrix.<your-domain>`)
All roles default to enabling their main component
(e.g. `matrix_mxisd_enabled: true`, `matrix_riot_web_enabled: true`).
Reasoning: if a role is included in a playbook (especially separately,
in another playbook), it should "work" by default.
Our playbook disables some of those if they are not generally useful
(e.g. `matrix_corporal_enabled: false`).
As suggested in #63 (Github issue), splitting the
playbook's logic into multiple roles will be beneficial for
maintainability.
This patch realizes this split. Still, some components
affect others, so the roles are not really independent of one
another. For example:
- disabling mxisd (`matrix_mxisd_enabled: false`), causes Synapse
and riot-web to reconfigure themselves with other (public)
Identity servers.
- enabling matrix-corporal (`matrix_corporal_enabled: true`) affects
how reverse-proxying (by `matrix-nginx-proxy`) is done, in order to
put matrix-corporal's gateway server in front of Synapse
We may be able to move away from such dependencies in the future,
at the expense of a more complicated manual configuration, but
it's probably not worth sacrificing the convenience we have now.
As part of this work, the way we do "start components" has been
redone now to use a loop, as suggested in #65 (Github issue).
This should make restarting faster and more reliable.
Pretty much all variables live in their own `matrix_<whatever>`
prefix now and are grouped closer together in the default
variables file (`roles/matrix-server/defaults/main.yml`).
`--log-driver=none` is used for all Docker containers now.
All these containers are started through systemd anyway and get logged in journald,
so there's no need for Docker to be logging the same thing using the default `json-file` driver.
Doing that was growing `/var/lib/docker/containers/..` infinitely until service/container restart.
As a result of this, things like `docker logs matrix-synapse` won't work anymore.
`journalctl -u matrix-synapse` is how one can see the logs.
Switching from from avhost/docker-matrix (silviof/docker-matrix)
to matrixdotorg/synapse.
The avhost/docker-matrix (silviof/docker-matrix) image used to bundle
in the coturn STUN/TURN server, so as part of the move,
we're separating this to a separately-ran service
(matrix-coturn.service, powered by instrumentisto/coturn-docker-image)
Slavi Pantaleev
Suguru Hirahara
Michael Collins
Dan Arnfield
Chris van Dijk
Hugues De Keyzer
Sylvia van Os