Since the additional JVBs are supposed to be configured after installing Jitsi with a JVB and it is confusing to place the instruction for configuring them (ansible-playbook -i inventory/hosts --limit jitsi_jvb_servers jitsi_jvb.yml --tags=common,setup-additional-jitsi-jvb,start) above the command for installation (ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start), this commit moves the section for configuring the additional JVBs into the "Usage" section.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add a warning sign to "Warning" labels
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-matrix-registration.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/maintenance-and-troubleshooting.md: remove a section for ma1sd
As the project has not updated since several years, it does not seem to be reasonable to pick it up specially on the document.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Common header for sections about adjusting the playbook configuration
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-dendrite.md: fix links to dendrite.yaml.j2
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bridge-mautrix-signal.md: remove a note added by a commit to remove signalgo
The note has been added with 2f6525ccb3666e0ec8f295e8eeffd78bac15a23e, apparently copied from docs/configuring-playbook-bridge-mautrix-signalgo.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bridge-mautrix-wsproxy.md: fix the anchor link text to mautrix-imessage documentation
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: add a note about the component being managed externally
Refer docs/configuring-playbook-backup-borg.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: use the common label for warning messages
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-ldap-auth.md: unrecommend using ma1sd for authentication
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-appservice-double-puppet.md: remove a duplicate anchor link
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs for old mautrix bridges for Facebook and Instagram: remove anchor links to the deleted files
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bridge-wechat.md: use common descriptions
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bridge-matrix-bridge-sms.md: create a section for the prerequisite
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/maintenance-and-troubleshooting.md: use the common header text
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Use common descriptions for adding the configuration
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bridge-mautrix-telegram.md: small edits
- Add a section for a Telegram API key
- Add a section for instruction about Appservice Double Puppet or Shared Secret Auth
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs for Draupnir and Mjolnir: replace colons with periods
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-rageshake.md: adopt the common instruction
Based on docs/configuring-playbook-sygnal.md regarding the notification about necessity of the service.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add a note about the components managed externally
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
This way, the "installing" sections would cover from beginners to advanced (professional) readers.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "just run-tags install-all/setup-all,start" with "just install-all/setup-all"
Thanks to the tip by Slavi that the overhead of ensure-matrix-users-created is negligible.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Edit installing instructions
- Move the anchor links to docs/just.md
- Add note about running "ensure-matrix-users-created" tags, if ansible-playbook's tags not "setup-all,ensure-matrix-users-created,start", ie. either "setup-all,start", "setup-email2matrix,start", "setup-aux-files,setup-corporal,start", or "setup-matrix-user-verification-service,start"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update descriptions about installation
- Introduce the most conservative and stable raw ansible-playbook command.
- Introduce the just commands on installing.md and maintenance-upgrading-services.md, not on quick-start.md, since it is too early for quick start guide readers who are just starting to climb learning curve to use the shortcuts.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: remove the note about ensure-matrix-users-created
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace installation command shortcut for the "just" program with the most conservative raw ansible-playbook command
This commit replaces installation command shortcut ("recipe") for the "just" program with the raw ansible-playbook command, so that the shortcut will be added to it later. The command is so conservative that failure of the command will mean something is clearly broken.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add comments about using setup-all instead of install-all
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about shortcut command with the "just" program to the ansible-playbook command with "setup-all" and "start" tags
It also explains difference between "just install-all" and "just setup-all" recipes. The explanation is based on docs/playbook-tags.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update raw ansible-playbook command to have it do what "just install-all" or "just setup-all" does
Since "just install-all" or "just setup-all" invokes "ensure-matrix-users-created" as well, it needs adding to the raw ansible-playbook command.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove "ensure-matrix-users-created" from the raw ansible-playbook command which does not need it
Also: update the "just" recipes accordingly. "just install-all" and "just setup-all" run "ensure-matrix-users-created" tag as well, therefore they need to be replaced with "run-tags" recipes to skip "ensure-matrix-users-created"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: add ensure-matrix-users-created to the raw ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about "ensure-matrix-users-created" and create a list with description about shortcut commands with "just"
This commit also fixes list item capitalization and punctuation.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes bullet lists
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-matrix-corporal.md and docs/configuring-playbook-email2matrix.md: adopt common instructions
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "run the installation command" with "run the playbook with tags"
Now that shortcut commands for the "just" program are displayed along with the existing "installation command", this commit replaces "run the installation command" with "run the playbook with tags" in order to prevent misunderstanding and confusion.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes about changing passwords of users specified on vars.yml
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-synapse-admin.md: add the playbook command and just recipes
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove redundant blank lines
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-alertmanager-receiver.md: remove the direction to proceed to Usage
Such a kind of direction is not used on other documentation, so it should be fine to just remove it.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/importing-synapse-media-store.md: code block for ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Triple backticks with syntax highlighting: yml → yaml
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Triple backticks with syntax highlighting: yaml and sh
The strings "yml" were replaced with "yaml" as the latter is used more than the former.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Triple backticks with syntax highlighting: INI
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: remove redundant white space characters after triple backticks
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "Element" with "Element Web"
- If Element indicates the web application, then it is changed to Element Web.
- If it indicates clients branded with Element such as Element desktop, web, mobile clients, then it is changed to Element clients.
- If it is combined with location sharing functionality, it is not changed.
with other some changes, including:
- Change "app.element.io" anchor link to "https://github.com/element-hq/element-web" on README.md, following other documentation files
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "SchildiChat" with "SchildiChat Web"
- If SchildiChat indicates the web application, then it is changed to SchildiChat Web.
- If it indicates clients branded with SchildiChat such as SchildiChat desktop, web, mobile clients, then it is changed to SchildiChat clients.
- If it is combined with location sharing functionality, it is not changed.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Rename configuring-playbook-client-schildichat.md to configuring-playbook-client-schildichat-web.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Rename configuring-playbook-client-element.md to configuring-playbook-client-element-web.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Based on https://github.com/turt2live/matrix-dimension
> An open source integration manager for matrix clients, like Element.
"Dimension" is one of the integration managers, and it is not something like Dimension Integration Manager, which could be abbreviated as DIM.
Also:
- Replace "integrations manager" with "integration manager"
- Fix typos
- Remove a line break
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
This adopts the structure of docs/configuring-playbook-matrix-authentication-service.md which was recently created.
- …
- Adjusting the playbook configuration
- …
- Adjusting the (service name here) URL
- …
- Adjusting DNS records
- Installing
- …
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Overall the playbook uses the expression "Add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file:" with the heading "Adjusting the playbook configuration" for sections to explain what to be added as variables
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
The variable matrix_nginx_proxy_proxy_jitsi_additional_jvbs isn't
needed, as this information is already in the inventory.
This contribution is provided by GRNET S.A. (grnet.gr).
This extends the collection with support for seamless authentication at the Jitsi server using Matrix OpenID.
1. New role for installing the [Matrix User Verification Service](https://github.com/matrix-org/matrix-user-verification-service)
2. Changes to Jitsi role: Installing Jitsi Prosody Mods and configuring Jitsi Auth
3. Changes to Jitsi and nginx-proxy roles: Serving .well-known/element/jitsi from jitsi.DOMAIN
4. We updated the Jitsi documentation on authentication and added documentation for the user verification service.
* Changes to allow a user to set the max participants on a jitsi
conference
* changed var name from jitsi_max_participants to matrix_prosody_jitsi_max_participants
* Add task to configure a standalone JVB on a different server
* add missing file
* set nginx config
* update prosody file and expose port 5222
* change variable name to server id
* formatting change
* use server id of jvb-1 for the main server
* adding documentation
* adding more jvbs
* rename variable
* revert file
* fix yaml error
* minor doc fixes
* renaming tags and introducing a common tag
* remove duplicates
* add mapping for jvb to hostname/ip
* missed a jvb_server
* Update roles/matrix-nginx-proxy/templates/nginx/conf.d/matrix-jitsi.conf.j2
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* PR review comments and additional documentation
* iterate on dict items
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Update docs/configuring-playbook-jitsi.md
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* adding documentation around the xmpp setting
* add common after
* reduce the number of services during init of the additional jvb
* remove rogue i
* revert change to jitsi init as it's needed
* only run the jvb service on the additional jvb host
* updating docs
* reset default and add documentation about the websocket port
* fix issue rather merge with master
* add missing role introduced in master
* this role is required too
* Adding new jitsi jvb playbook, moving setup.yml to matrix.yml and creating soft link
* updating documentation
* revert accidental change to file
* add symlink back to roles to aid running of the jitsi playbook
* Remove extra space
* Delete useless playbooks/roles symlink
* Remove blank lines
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
Suguru Hirahara
Suguru Hirahara
Slavi Pantaleev
Pierre 'McFly' Marty
Antonis Christofides
Paul N
jakicoll
Rhys
Warren Bailey
François Darveau
ppacheco28