Also:
- docs/configuring-playbook-bot-draupnir.md: adjust the sections
- docs/configuring-playbook-bot-mjolnir.md: add the common instruction to the document for Mjolnir
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Removing the rate limits is the last task before setting the component for use after the bot user is supposed to have been created successfully. Since running the playbook with the "start" tag would start Draupnir or Mjolnir as well, it should be done after running the playbook for installation initially.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
It is necessary to run the playbook to apply the configuration so that the curl command, which is described below, can be successfully executed.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
- Move the note about ensure-matrix-users-created from below
- Update the installation command: the "ensure-matrix-users-created" tag is no longer necessary as it is instructed to run above
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Because enabling the native E2EE support requires the clean access token obtained with curl, which is supposed to be specified to "matrix_bot_draupnir_access_token", setting "matrix_bot_draupnir_enable_experimental_rust_crypto" to true means that "matrix_bot_draupnir_access_token" is also specified.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
The setting is required, and it is not friendly to split the required settings with optional ones.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
- docs/configuring-playbook-bot-mjolnir.md: move the warning above where the access token is mentioned at first
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Now that the bot user for Draupnir is created automatically and you no longer need to register it manually since its 2.0.0 version, it does not seem to be sensible to synchronize descriptions about inviting bots between documents for Draupnir and Mjolnir and instruct to invite the bot which does not exist just yet. Inviting the bot user after actually creating it will also spare the possible error message about the nonexistent user.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Draupnir 2.0.0
The config getting changes all over the place is because of 2.0 having removed a lot of config options due to the code being removed.
* Update Draupnir Documentation to reflect state as of 2.0.0
* Apply Review Feedback
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Change Room IDs found in code review to not conform to playbook standard.
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Further Integrate Code Review Feedback
* Apply remaining suggestions from code review.
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Apply Configuration Review Feedback
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Add Self Registration and Native Login to Draupnir
* Rework Draupnir Documentation to Remove Pantalaimon
* Set bot.draupnir as default username for the bot in config
* Draupnir 2.0.1
* Integrate Review Feedback on Structure of Docs
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
* Further Restructure Docs and tweak variables in response.
* Only auto-create draupnir user if a password has been set
The Draupnir role supports configuring it with either an access token or with a password.
When a password is not assigned (which means the access token mode is used), the user is to be created manually.
* Add ensure-matrix-users-created tag
Now that the Draupnir user may be auto-created in certain configurations (if a password is assigned), it's useful to have the tag there.
---------
Co-authored-by: Suguru Hirahara <luixxiul@users.noreply.github.com>
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
* Add a warning sign to "Warning" labels
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-matrix-registration.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/maintenance-and-troubleshooting.md: remove a section for ma1sd
As the project has not updated since several years, it does not seem to be reasonable to pick it up specially on the document.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Common header for sections about adjusting the playbook configuration
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-dendrite.md: fix links to dendrite.yaml.j2
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bridge-mautrix-signal.md: remove a note added by a commit to remove signalgo
The note has been added with 2f6525ccb3666e0ec8f295e8eeffd78bac15a23e, apparently copied from docs/configuring-playbook-bridge-mautrix-signalgo.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bridge-mautrix-wsproxy.md: fix the anchor link text to mautrix-imessage documentation
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: add a note about the component being managed externally
Refer docs/configuring-playbook-backup-borg.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: use the common label for warning messages
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-ldap-auth.md: unrecommend using ma1sd for authentication
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-appservice-double-puppet.md: remove a duplicate anchor link
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs for old mautrix bridges for Facebook and Instagram: remove anchor links to the deleted files
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bridge-wechat.md: use common descriptions
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bridge-matrix-bridge-sms.md: create a section for the prerequisite
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/maintenance-and-troubleshooting.md: use the common header text
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Use common descriptions for adding the configuration
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bridge-mautrix-telegram.md: small edits
- Add a section for a Telegram API key
- Add a section for instruction about Appservice Double Puppet or Shared Secret Auth
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs for Draupnir and Mjolnir: replace colons with periods
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-rageshake.md: adopt the common instruction
Based on docs/configuring-playbook-sygnal.md regarding the notification about necessity of the service.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add a note about the components managed externally
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
- Add "To use the bot" if it does not exist: adopt the format of the docs for bridges
- Add "Prerequisites" section if an API key or user account is required
- Use the common instruction for getting an access token
- Replace "Get" with "Obtain" about getting keys or access tokens
- Replace placeholders for access tokens on docs/configuring-playbook-bot-go.neb.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
This commit replaces instructions to create passwords, passphrases, or secrets with common ones.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-appservice-draupnir-for-all.md: fix sections title
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-appservice-draupnir-for-all.md: merge configuration sections
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-appservice-draupnir-for-all.md: small edits
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-appservice-draupnir-for-all.md: remove a note abour Pantalaimon's unavailability
Pantalaimon can be installed and it has become available for matrix-bot-draupnir and matrix-bot-mjolnir already.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-appservice-draupnir-for-all.md: edit instruction of setting an alias to the management room
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bot-draupnir.md: remove 'c.' from the section title
The section is not related to choosing E2EE support.
Also: replace the instruction to go to the section with the anchor link.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bot-draupnir.md and docs/configuring-playbook-bot-mjolnir.md: create a section for common configs
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update draupnir and mjolnir docs: create "Extending the configuration" sections
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bot-draupnir.md and docs/configuring-playbook-bot-mjolnir.md: create the "End-to-End Encryption support" section
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bot-mjolnir: adjust the section hierarchy
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update draupnir and mjolnir docs: replace numbering
This is a follow-up to e5ab17cafd.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update draupnir and mjolnir docs: create "Prerequisites" section
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update draupnir and mjolnir docs: emphasize necessity of disabling rate limit
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update draupnir and mjolnir docs: instruction for discharging rate limit on Synapse
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update draupnir and mjolnir docs: edit the placeholder for matrix_bot_draupnir_pantalaimon_password and matrix_bot_mjolnir_pantalaimon_password
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update draupnir and mjolnir docs: add an anchor link to "Configuration with E2EE support"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bot-draupnir.md: move the "Abuse Reports" section above
Also: use "pollReports: true" as an example for extending the configuration.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-bot-draupnir.md and docs/configuring-playbook-bot-mjolnir.md: small edits
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-appservice-draupnir-for-all.md: use a common expression
cf. docs/configuring-playbook-alertmanager-receiver.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-appservice-draupnir-for-all.md: integrate the description for installation by Draupnir into our description
Check the original one: 120b37f3ea
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-appservice-draupnir-for-all.md: fix a typo
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
- Replace links to the documentation with ones to projects' README files, if these have been linked to the project directly
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
The original ID (`@example:example.com`) has not matched with the user IDs which those pages explained on "Registering the bot account" section.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
This way, the "installing" sections would cover from beginners to advanced (professional) readers.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "just run-tags install-all/setup-all,start" with "just install-all/setup-all"
Thanks to the tip by Slavi that the overhead of ensure-matrix-users-created is negligible.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Edit installing instructions
- Move the anchor links to docs/just.md
- Add note about running "ensure-matrix-users-created" tags, if ansible-playbook's tags not "setup-all,ensure-matrix-users-created,start", ie. either "setup-all,start", "setup-email2matrix,start", "setup-aux-files,setup-corporal,start", or "setup-matrix-user-verification-service,start"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update descriptions about installation
- Introduce the most conservative and stable raw ansible-playbook command.
- Introduce the just commands on installing.md and maintenance-upgrading-services.md, not on quick-start.md, since it is too early for quick start guide readers who are just starting to climb learning curve to use the shortcuts.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: remove the note about ensure-matrix-users-created
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace installation command shortcut for the "just" program with the most conservative raw ansible-playbook command
This commit replaces installation command shortcut ("recipe") for the "just" program with the raw ansible-playbook command, so that the shortcut will be added to it later. The command is so conservative that failure of the command will mean something is clearly broken.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add comments about using setup-all instead of install-all
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about shortcut command with the "just" program to the ansible-playbook command with "setup-all" and "start" tags
It also explains difference between "just install-all" and "just setup-all" recipes. The explanation is based on docs/playbook-tags.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update raw ansible-playbook command to have it do what "just install-all" or "just setup-all" does
Since "just install-all" or "just setup-all" invokes "ensure-matrix-users-created" as well, it needs adding to the raw ansible-playbook command.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove "ensure-matrix-users-created" from the raw ansible-playbook command which does not need it
Also: update the "just" recipes accordingly. "just install-all" and "just setup-all" run "ensure-matrix-users-created" tag as well, therefore they need to be replaced with "run-tags" recipes to skip "ensure-matrix-users-created"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: add ensure-matrix-users-created to the raw ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about "ensure-matrix-users-created" and create a list with description about shortcut commands with "just"
This commit also fixes list item capitalization and punctuation.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes bullet lists
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-matrix-corporal.md and docs/configuring-playbook-email2matrix.md: adopt common instructions
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "run the installation command" with "run the playbook with tags"
Now that shortcut commands for the "just" program are displayed along with the existing "installation command", this commit replaces "run the installation command" with "run the playbook with tags" in order to prevent misunderstanding and confusion.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes about changing passwords of users specified on vars.yml
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-synapse-admin.md: add the playbook command and just recipes
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove redundant blank lines
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-alertmanager-receiver.md: remove the direction to proceed to Usage
Such a kind of direction is not used on other documentation, so it should be fine to just remove it.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/importing-synapse-media-store.md: code block for ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Triple backticks with syntax highlighting: yml → yaml
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Triple backticks with syntax highlighting: yaml and sh
The strings "yml" were replaced with "yaml" as the latter is used more than the former.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Triple backticks with syntax highlighting: INI
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-jitsi.md: remove redundant white space characters after triple backticks
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "Element" with "Element Web"
- If Element indicates the web application, then it is changed to Element Web.
- If it indicates clients branded with Element such as Element desktop, web, mobile clients, then it is changed to Element clients.
- If it is combined with location sharing functionality, it is not changed.
with other some changes, including:
- Change "app.element.io" anchor link to "https://github.com/element-hq/element-web" on README.md, following other documentation files
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "SchildiChat" with "SchildiChat Web"
- If SchildiChat indicates the web application, then it is changed to SchildiChat Web.
- If it indicates clients branded with SchildiChat such as SchildiChat desktop, web, mobile clients, then it is changed to SchildiChat clients.
- If it is combined with location sharing functionality, it is not changed.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Rename configuring-playbook-client-schildichat.md to configuring-playbook-client-schildichat-web.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Rename configuring-playbook-client-element.md to configuring-playbook-client-element-web.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Suguru Hirahara
Catalan Lover
Suguru Hirahara