* Replace "just run-tags install-all/setup-all,start" with "just install-all/setup-all"
Thanks to the tip by Slavi that the overhead of ensure-matrix-users-created is negligible.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Edit installing instructions
- Move the anchor links to docs/just.md
- Add note about running "ensure-matrix-users-created" tags, if ansible-playbook's tags not "setup-all,ensure-matrix-users-created,start", ie. either "setup-all,start", "setup-email2matrix,start", "setup-aux-files,setup-corporal,start", or "setup-matrix-user-verification-service,start"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update descriptions about installation
- Introduce the most conservative and stable raw ansible-playbook command.
- Introduce the just commands on installing.md and maintenance-upgrading-services.md, not on quick-start.md, since it is too early for quick start guide readers who are just starting to climb learning curve to use the shortcuts.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: remove the note about ensure-matrix-users-created
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace installation command shortcut for the "just" program with the most conservative raw ansible-playbook command
This commit replaces installation command shortcut ("recipe") for the "just" program with the raw ansible-playbook command, so that the shortcut will be added to it later. The command is so conservative that failure of the command will mean something is clearly broken.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add comments about using setup-all instead of install-all
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about shortcut command with the "just" program to the ansible-playbook command with "setup-all" and "start" tags
It also explains difference between "just install-all" and "just setup-all" recipes. The explanation is based on docs/playbook-tags.md
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update raw ansible-playbook command to have it do what "just install-all" or "just setup-all" does
Since "just install-all" or "just setup-all" invokes "ensure-matrix-users-created" as well, it needs adding to the raw ansible-playbook command.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove "ensure-matrix-users-created" from the raw ansible-playbook command which does not need it
Also: update the "just" recipes accordingly. "just install-all" and "just setup-all" run "ensure-matrix-users-created" tag as well, therefore they need to be replaced with "run-tags" recipes to skip "ensure-matrix-users-created"
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-etherpad.md: add ensure-matrix-users-created to the raw ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add description about "ensure-matrix-users-created" and create a list with description about shortcut commands with "just"
This commit also fixes list item capitalization and punctuation.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes bullet lists
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-matrix-corporal.md and docs/configuring-playbook-email2matrix.md: adopt common instructions
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Replace "run the installation command" with "run the playbook with tags"
Now that shortcut commands for the "just" program are displayed along with the existing "installation command", this commit replaces "run the installation command" with "run the playbook with tags" in order to prevent misunderstanding and confusion.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Add notes about changing passwords of users specified on vars.yml
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-synapse-admin.md: add the playbook command and just recipes
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Remove redundant blank lines
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/configuring-playbook-alertmanager-receiver.md: remove the direction to proceed to Usage
Such a kind of direction is not used on other documentation, so it should be fine to just remove it.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* Update docs/importing-synapse-media-store.md: code block for ansible-playbook
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
---------
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Overall the playbook uses the expression "Add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file:" with the heading "Adjusting the playbook configuration" for sections to explain what to be added as variables
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
This was meant to serve as an intermediary for services needing to reach
the homeserver. It was used like that for a while in this
`bye-bye-nginx-proxy` branch, but was never actually public.
It has recently been superseded by homeserver-like services injecting
themselves into a new internal Traefik entrypoint
(see `matrix_playbook_internal_matrix_client_api_traefik_entrypoint_*`),
so `matrix-homeserver-proxy` is no longer necessary.
---
This is probably a good moment to share some benchmarks and reasons
for going with the internal Traefik entrypoint as opposed to this nginx
service.
1. (1400 rps) Directly to Synapse (`ab -n 1000 -c 100 http://matrix-synapse:8008/_matrix/client/versions`
2. (~900 rps) Via `matrix-homeserver-proxy` (nginx) proxying to Synapse (`ab -n 1000 -c 100 http://matrix-homeserver-proxy:8008/_matrix/client/versions`)
3. (~1200 rps) Via the new internal entrypoint of Traefik (`matrix-internal-matrix-client-api`) proxying to Synapse (`ab -n 1000 -c 100 http://matrix-traefik:8008/_matrix/client/versions`)
Besides Traefik being quicker for some reason, there are also other
benefits to not having this `matrix-homeserver-proxy` component:
- we can reuse what we have in terms of labels. Services can register a few extra labels on the new Traefik entrypoint
- we don't need services (like `matrix-media-repo`) to inject custom nginx configs into `matrix-homeserver-proxy`. They just need to register labels, like they do already.
- Traefik seems faster than nginx on this benchmark for some reason, which is a nice bonus
- no need to run one extra container (`matrix-homeserver-proxy`) and execute one extra Ansible role
- no need to maintain a setup where some people run the `matrix-homeserver-proxy` component (because they have route-stealing services like `matrix-media-repo` enabled) and others run an optimized setup without this component and everything needs to be rewired to talk to the homeserver directly. Now, everyone can go through Traefik and we can all run an identical setup
Downsides of the new Traefik entrypoint setup are that:
- all addon services that need to talk to the homeserver now depend on Traefik
- people running their own Traefik setup will be inconvenienced - they
need to manage one additional entrypoint
* add prometheus-nginxlog-exporter role
* Rename matrix_prometheus_nginxlog_exporter_container_url to matrix_prometheus_nginxlog_exporter_container_hostname
* avoid referencing variables from other roles, handover info using group_vars/matrix_servers
* fix: stop service when uninstalling
fix: typo
move available arch's into a var
fix: text
* fix: prometheus enabled condition
Co-authored-by: ikkemaniac <ikkemaniac@localhost>
Suguru Hirahara
Suguru Hirahara
Slavi Pantaleev
ikkemaniac